4ft 18W VersaT8 LED Tube, Ballast Compatible or Bypass, (UL/DLC)-10 Pack
The VersaT8 is our premier LED tubelight and works with most T8 electronic ballasts. The advantage to this tube is its versatility. Not only can this tube work with a ballast, it can also work without a ballast, directly wired into AC100-277V. The power consumption of these LED lights range from 12-20W and comes in following colors: 3000K warm white and 5000K cool white
These eco-friendly bulbs have a lifespan up to 50,000 hours or more and can save you up to 60% in power consumption. These are the highest quality products and UL and DLC qualified with a 5 year warranty.
Our LED tubes bypass retrofit T8/T12 32w and 40w fluorescent tubes.
Our LED tubes plug and play feature work with most T8 rapid start and instant start ballasts.
|
SKU: |
GT-T8-18W1200 BIXX-1-C-30K GT-T8-18W1200 BIXX-1-F-30K GT-T8-18W1200 BIXX-1-C-50K GT-T8-18W1200 BIXX-1-F-50K |
|
Qualification: |
DLC, UL |
|
Power: |
18W |
|
Color: |
3000K, 5000K |
|
CRI: |
> 80 |
|
Operation Temperature: |
-22 to 104 degrees Fahrenheit |
|
Input Voltage: |
100-347VAC with ballast, |
|
Frequency: |
50-60 Hz |
|
Lifespan: |
50,000 hours |
|
Lumens: |
130 to 149 lm/w with ballast, |
|
Led Type: |
SMD 2835 |
|
Beam Angle (°): |
120 |
|
Warranty: |
5 years |
|
Quantity: |
10 tubes |
|
Wiring: |
Single End, Dual End, |
|
Driver: |
Internal |
|
Power factor: |
More than 0.99 |
| Housing: | Aluminum |
Preparing For Installation
1. Check the ballast installed in the field and make sure the ballast is in manufacturer’s ballast list which can be found below. If the ballast out of the manufacturer’s ballast list, a test may be needed before any mass installation.
2. Loose and damaged lamp holder and socket need to be adjusted or be replaced.
Installation
RETROFIT - you will need to bypass the ballast
